Start CNC lathe.
CNC-450L, turning diameter is 330mm, turning length is 820mm, machine dimensions (L x W x H) is 3,400 x 2,300 x 1,900mm, the machine weight is 5,400kgs.
CNC-450L, turning diameter is 330mm, turning length is 820mm, machine dimensions (L x W x H) is 3,400 x 2,300 x 1,900mm, the machine weight is 5,400kgs.
Features
- 12-position turret is standard.
- FANUC 0i-TC CNC control is standard.
- FANUC 18i-TB CNC control is optional.
- Meehanite cast iron on major structure.
- Slant saddle construction.
- Box type saddle slideways.
- Spindle runs on precision double-row roller bearing and angular contact ball bearing.
- Ø86mm spindle bore permits heavier cutting capacity.
- Hydraulic tailstock.
- Automatic lubrication for all slideways and ball screws.
- Ø10"3-jaw hydraulic hollow chuck.
- Standard accessories
- FANUC 0i-TC CNC controller.
- Ø10"3-jaw hydraulic hollow chuck with hard and soft jaw (each one set).
- Ø8"3-jaw hydraulic hollow chuck with hard and soft jaw (each one set) (optional).
- 12-position turret.
- 8-position turret (optional).
- High pressure cooling system.
- Hydraulic tailstock.
- Automatic lubrication system.
- Tool box & tools.
- Optional accessories
- FANUC 18i-TB CNC controller.
- Chip conveyor and bucket.
- Parts catcher.
- Tool presetter.
- Auto power off.
- Auto door.
- Liquid / oil separator.
- Bar feeder interface.
- Bar feeder.
| Model | CNC-450L | |
|---|---|---|
| Capacity | Max. swing diameter | 580 |
| Capacity | Max. turning diameter | 330 |
| Capacity | Max. turning length | 820 |
| Capacity | Distance between centers | 940 |
| Travel | X-axis | 185 |
| Travel | Z-axis | 940 |
| Spindle | Max. speed | 3,000RPM |
| Spindle | Spindle nose | A2-8 |
| Spindle | Spindle bearing ID | 130 |
| Spindle | Spindle bore | 86 |
| Spindle | Bar capacity | 75 |
| Turret | Type | 12-station |
| Turret | OD tool | ⌈ 25 |
| Turret | ID tool | Ø32 |
| Feed Rate | X-axis | 15M / min (opt.: X = 20M / min) |
| Feed Rate | Z-axis | 15M / min (opt.: Z = 24M / min) |
| Tailstock | Quill diameter | 75 |
| Tailstock | Quill taper | MT#4 |
| Tailstock | Travel | 900 |
| Tailstock | Quill travel | 80 |
| Motor | Spindle motor | αP22 (11 / 15kw) |
| Motor | Feed drive motor | 2.8kw (X-axis) |
| Motor | Feed drive motor | 2.1kw (Z-axis) |
| Motor | Hydraulic motor | 2HP |
| Motor | Coolant pump motor | 1HP |
| Machine dimensions | Machine weight | 5,400kgs |
| Machine dimensions | L x W x H | 3,400 x 2,300 x 1,900mm |
Main Products
Vertical Machining Center, High Speed Vertical Machining Center, High Speed Cnc Engraving Machine, Cnc Lathe